直插led灯珠都有哪些好厂家，国内怎么选

5MM草帽LED系列
产品型号：TM-L05CMW-E
应用范围：照明，背光等
产品描述：台铭直插式LED,体积小,高亮度,能耗低,应用于照明,背光等领域。
产品介绍



注：亮度、角度、色温、紫光波段均可按客户要求做货。
Type
规格/型号	Emitting Colo
r
颜色	Material 
原材料	View Angle
发光角度	VF(V) 
电压	IV (MCD) 
亮度	WL(nm) 
波长	IF(MA）
电流
Typ	Max	Min	Typ	Min	Max
TM-L05CMR-E
（红光）	Red	AlGaInP	110°	1.8	2.4	3000	4000	620	630	20MA
TM-L05Y-E
（黄光）	Yellow	AlGaInP	110°	1.8	2.4	300	800	585	595	20MA
TM-L05CMCG-E
（翠绿）	Green	InGaN/GaN	110°	2.8	3.4	3000	4000	520	530	20MA
TM-L05CMB-E
（蓝光）	Blue	InGaN/GaN	110°	2.8	3.4	800	1200	460	475	20MA
TM-L05UVCM365-E
（紫光）	Purple	InGaN/GaN	110°	2.8	3.4	6	8	365	370	20MA
TM-L05UVCM370-E
（紫光）	Purple	InGaN/GaN	110°	2.8	3.4	10	13	370	375	20MA
TM-L05UVCM380-E
（紫光）	Purple	InGaN/GaN	110°	2.8	3.4	14	18	380	385	20MA
TM-L05UVCM400-E
（紫光）	Purple	InGaN/GaN	110°	2.8	3.4	60	70	395	400	20MA
TM-L05UVCM405-E
（紫光）	Purple	InGaN/GaN	110°	2.8	3.4	70	80	400	405	20MA
TM-L05UVCM410-E
（紫光）	Purple	InGaN/GaN	110°	2.8	3.4	80	90	405	410	20MA
TM-L05ZBCM55-E
（白光）	White	InGaN/GaN	110°	2.8	3.4	1800	2200	2500	21000	20MA


Supporter shaping：
Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.